爆轰波在可压缩金属板面上斜反射初始参数的计算

本文计算了爆轰波在可压缩金属板面上斜反射时的初始参数。计算中选用的五种炸药是TNT(p_0为1.64g/cm~3,1.45g/cm~3)、RDX(p_0为1.59g/cm~3,1.76g/cm~3,1.80g/cm~3)、RDX/TNT(77/23)(p_0为1.75g/cm~3)、Pentolite(p_0为1.65g/cm~3,1.68g/cm~3)和B 炸药(p_0为1.71g/cm~3);三种介质是铁、铜和铝。     

强脉冲 CO2 激光与靶的相互作用

在真空背景下的实验表明,当微秒量级的强脉冲激光与靶材相互作用时,由于靶材的升华,激光维持爆震波依然存在。爆震波产生的压缩波传入靶内,该应力波的作用是材料破坏的重要因素。而强脉冲激光引起的汽化反冲压力、热应力和烧蚀破坏也是不可忽视的因素。实验还表明,在真空背景下维持爆震波足以将后续激光屏蔽。     

Windows设备驱动程序结构及兼容性探讨

介绍了Win95虚拟设备驱动程序、WinNT内核模式驱动程序与Win32设备驱动程序的概念与结构特性．讨论在不同Windows开发平台下设备驱动程序的兼容性．     

减小两栖车辆水上行驶阻力的方案探讨

针对两栖车辆水上行驶阻力的特点,重点研究了形状阻力和兴波阻力对水上行驶速度的影响,提出了相应的措施和方案,并对其可行性和优缺点进行了分析.     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Numerical modelling of non-ideal detonation in ANFO explosives applying Wood-Kirkwood theory coupled with EXPLO5 thermochemical code

Ammonium nitrate and fuel oil (ANFO) based explosive is a classic example of non-ideal high explosives. Its detonation is characterized by a strong dependence of detonation parameters on explosive charge diameter, presence and characteristics of confinement, as well as incomplete consumption of explosive at the sonic point.In this work we propose a detonation model based on the Wood-Kirkwood (WK) theory coupled with the thermochemical code EXPLO5 and supplemented with reaction rate models. Our objective is to analyze the validity of the model for highly non-ideal ANFO explosives, with emphasis on effect of reaction rate models.It was found that both single-step and two-step pressure-based models can be calibrated to reproduce experimental detonation velocity-charge radius data of ANFO at radii significantly above the failure radius (i.e. for D/D_id > ∼0.6). Single-step pressure-based model, with the pressure exponent equal to 1.4, proved to be the most accurate, even in the vicinity of the failure radius. The impact of the rate models is most evident on temporal (and spatial) distribution of flow parameters in detonation driving zone, especially when it comes to the conversion and width of detonation driving zone.     

某型军用履带车辆行驶强化试验仿真技术研究

以某型履带车辆为例，通过建立其虚拟样机，构造虚拟数字路面，进行履带车辆强化行驶试验仿真，获得零部件载荷时间历程。基于仿真结果，利用有限元与疲劳寿命分析软件，计算车辆零部件的疲劳寿命，再通过比较分析获得履带车辆在几个典型路面下的强化系数。研究结果对于新型履带车辆的开发及现役履带车辆维修保障具有参考价值。     

2种结构驱动线圈对电枢受力的影响

介绍了电磁同步线圈驱动器工作原理，并利用有限元分析软件ANSYS建立驱动线圈的三维模型。在不同结构的驱动线圈的驱动下，分别对电枢所受电磁力进行仿真，得到电枢在不同情况下的受力变化规律；在加载情况完全一致的情况下，对比不同结构的驱动线圈对电枢的作用力，得出2层驱动线圈对电枢综合作用效果较好的结论。     

热射流起爆过程的数值模拟

采用改进的化学非平衡流解耦方法处理Euler反应流方程,并以H2/air 9组分21方程模型对竖直喷注的热射流起爆过程进行了二维数值模拟。对流项采用五阶WENO离散格式,时间推进采用二阶Runge-Kutta方法。详细分析了热射流以不同速度、入射位置、入射宽度和入射倾角喷射时在爆震管内形成的流场,总结了射流参数状态影响起爆的一般规律;解释了激波、火焰的相互作用对"热点"的形成以及转变为爆震的影响,特别是激波反射对"热点"形成的促进作用。结果表明,爆震波通常由火焰面和固壁附近狭长未燃区域中的"热点"产生。"热点"向爆震波发展的过程是过驱爆震阶段,存在三波结构。为了实现快速起爆,应当增大射流入射速度、贴近侧壁并以适当入射角度喷射热射流。